Today let us talk about the sticky powder weighing and lifting

When we pack viscous powder , the following issues may arise

1.There is adhesive material on the elevator, causing material waste

2. The sticking of materials in the weighing section can lead to inaccurate weighing.

3. Viscous substances can also reduce the service life of machines

if your raw material is viscous , we must produce the machine according to the material characteristics.So as to avoid the above problems from occurring

From our experience , We must start from the following aspects

The machine must be sprayed with an anti stick coating. currently we use Teflon as the coating.For general viscous substances, the anti sticking effect is very good.

If your material is special, you can also send us pictures and videos of the material, and our technical personnel will design a solution based on your material.

The machine also needs to be adjusted to make it easier for the materials to be discharged

We have a customer whose material is sticky. The selection of unsuitable machines has led to an increase in labor costs.

Here is the case for your reference 

This picture is their weighing part , There must be continuous manual stirring to prevent sticking.

Not only does it increase labor costs, but the weighing speed is also very slow.

You can see the elevator hopper,There are some material residues that cause unnecessary waste.

After checked their questions ,our technician give them new project

First the elevator use this type with Teflon costing ,Transport one hopper at a time to reduce the number of contacts between the material and the hopper

Then we also make new drawing for customer . Drawing also can make customer before buy the machine.










So when you choose lifting machine and packing machine , please know your material characteristics then choose suitable machine.